Specifically engineered and designed high-performance roof system solutions to meet project requirements — structural, thermal, acoustic and condensation performance assessed for every project.
Project: Lyttelton Port Company Workshop
System attributes
Roof membrane and metal skin performance
Thermal performance
Systems can be designed to meet the applicable NCC energy efficiency requirements and Australian climate zone conditions, achieving insulation values of up to R7.
Acoustic performance
High levels of acoustic control through acoustic board layers, high-density roof boards, insulation, and perforated LinerDeck options to manage interior reverberation.
Durability
RoofLogic systems use high-performance components with proven in-service histories, backed by a full system warranty for long-term reliability.
Structurally tested system
Continuous and comprehensive structural testing verifies the performance and limitations of complete RoofLogic systems.
Manage condensation risk
Detailed thermal and hygrothermal modelling is undertaken for each project to confirm the specified system will control condensation risk and reduce the potential for mould or corrosion.
Fire performance
RoofLogic high-performance roof systems are tested to establish fire performance.
Programme advantages
Installing the LinerDeck early in the build sequence provides immediate weather protection to the interior, improving programme certainty and site health and safety.
Corrosion zones
All roof membrane and metal skin systems can go up to ISO Category 5 corrosion zones (severe marine environments).
Weathertightness
Weathertightness is a primary consideration in the design of every RoofLogic roof system. Each system is developed with project-specific detailing and installation requirements to support durable weather protection when installed by an approved roofing contractor in accordance with RoofLogic documentation and applicable Australian codes and standards.
Reference projects
Bell Gully and PwC, Wellington Waterfront, NZ
University of Waikato, Tauranga Campus, NZ
Te Raekura Redcliffs School, NZ
The Runholder – Te Kairanga Winery, NZ
Te Kahu o Waipuna, Marlborough NZ
AS Colour Warehouse, Auckland, NZ
The range
System families
FiberthermX
Suitable applications: Metal skin high-performance roof system for education buildings, retail and large area roofs.
The RoofLogic FiberthermX system is a proven commercial roofing solution that provides a range of important advantages in terms of design, performance and construction.
Engineered to meet wind (positive and negative), snow, and seismic design loads (SLS and ULS), FiberthermX is the culmination of 10 years of Research & Development. At the heart of the FiberthermX system is the structural post and rail assembly that is used to separate the outer skin from the internal liner deck.
By incorporating the structural rail assembly, the FiberthermX system optimises the utilisation of low-density Glass Wool insulation, eliminating thermal breaks and cold bridging that are common flaws in conventional roof assemblies.
Metal SkinMinimise Rain NoiseNon-combustible SystemStructural Post & Rail SystemFast Install
●Thermal Performance (able to meet applicable NCC energy efficiency requirements across Australian climate zones)
●Structural performance, tested for Australian wind, snow and seismic conditions
●Management of Condensation Risk
●Aluminium Post & Rail assembly for superior strength and durability (50+ years)
●Completely Non-combustible
●Programme benefits with early close in
●Value for money
●Acoustic performance (tested)
●Low embodied carbon due to mineral wool insulation
●Formaldehyde free
●Durability up to 50 years for the complete system
●Design Flexibility
Ultratherm MSR
Suitable applications: Metal skin high-performance roof system for education buildings, high-end insulated metal roofs and buildings with complex geometries.
Insulated metal skin high-performance roof system assembly providing thermal, acoustic and structural performance to meet the precise project requirements. Install the Ultratherm MSR system over RoofLogic's engineered structural liner deck or standard plywood and concrete substrates.
RoofLogic Ultratherm MSR is a proven commercial roofing solution that provides the highest levels of thermal and acoustic performance. RoofLogic offers tailored system designs for each project, carefully selecting components to ensure the installed system meets the client's requirements — structural, thermal and acoustic aspects are evaluated, and project-specific hygrothermal analysis mitigates condensation, mould and corrosion risk.
Over the past decade, Ultratherm MSR has seen widespread installation across New Zealand, covering tens of thousands of square metres, with feedback from designers and their clients unanimous: a robust roof system that delivers exceptional weathertightness while enhancing thermal and acoustic performance.
Metal SkinComplex GeometriesVariable Acoustic PerformanceDesign Flexibility
●Thermal Performance (able to meet applicable NCC energy efficiency requirements across Australian climate zones)
●Management of Condensation Risk
●Programme
●Weathertightness
●Acoustic Performance (Tested)
●Design Flexibility
Ultratherm Xtreme
Suitable applications: Membrane high-performance roof systems for high-end buildings, low pitch.
Insulated membrane roof assembly providing thermal, acoustic and structural performance to meet the precise project requirements. Install the Ultratherm Xtreme system over RoofLogic's engineered structural base deck or standard plywood and concrete substrates.
Engineers have meticulously designed each component to deliver the utmost levels of performance. RL BaseDeck is the only steel base deck that has undergone rigorous testing in New Zealand and Australia for wind uplift, point load, and fastener pull-out resistance. RL PIR Board provides exceptional thermal performance and improved impact resistance, with compressive strength twice that of most other PIR products on the market.
Ultratherm Xtreme is a commercial membrane roofing solution providing superior thermal and acoustic performance and extreme durability with Fibertite KEE membrane and Derbigum modified bitumen membrane. For non high-performance roof system applications, the membranes can be adhered to a range of substrates including concrete or ply.
Suitable applications: Existing membrane and metal skin roofs on occupied buildings.
FiberthermX, Ultratherm Xtreme and Ultratherm MSR are all available as Recover Systems — a suite of re-roofing solutions that allows the refreshing of existing roof assemblies. RoofLogic designs and engineers Recover systems to provide long-term durability, weathertightness, and enhanced thermal and acoustic performance. The simplification of the re-roofing process with a fully warranted system solution has made Recover our most popular system.
The FiberthermX Recover System constructs over existing metal roofing iron using the Post & Rail System with Glasswool insulation, enabling the refreshing of existing roof assemblies.
Unlike typical re-roofing projects, the FiberthermX Recover System enables the building's occupants and activities to remain undisturbed, requiring no relocation.
Condensation Management
RoofLogic develops the system and provides project-specific technical support, while installation is carried out by an approved roofing contractor in accordance with RoofLogic requirements. This coordinated approach helps manage condensation risk throughout the service life of the roof system.
Cost-Effective
Avoids many expenses associated with re-roofing, including tenting, disposal of old roofing materials, and the labour costs involved in those tasks.
Tailored Engineering
RoofLogic conducts a comprehensive roof assessment to ensure precise engineering, meeting all structural performance requirements for the project.
Enhanced Detailing
Enables meticulous roof detailing, enhancing the durability and weathertightness of critical roof junctions for the long term.
Improved Thermal Efficiency
Offers the flexibility to incorporate additional insulation layers, significantly enhancing the thermal performance of a roof.
Ultratherm MSR Recover System
The Ultratherm MSR Recover System is constructed over existing metal roofing iron, creating a high-performance roof system solution.
Unlike typical re-roofing projects, the system allows the building's occupants and activities to remain undisturbed; no relocation is required.
Condensation Management
RoofLogic develops the system and provides project-specific technical support, while installation is carried out by an approved roofing contractor in accordance with RoofLogic requirements. This coordinated approach helps manage condensation risk throughout the service life of the roof system.
Cost-Effective
Avoids many expenses associated with re-roofing, including tenting, disposal of old roofing materials, and associated labour costs.
Tailored Engineering
RoofLogic conducts a comprehensive roof assessment to ensure the system is precisely engineered to meet all structural performance requirements.
Enhanced Detailing
Enables meticulous roof detailing, enhancing the durability and weathertightness of critical roof junctions for the long term.
Improved Thermal Efficiency
Offers the flexibility to incorporate additional insulation layers, significantly enhancing the thermal performance of a roof.
Ultratherm Xtreme Recover System
The Ultratherm Xtreme Recover System is a membrane system constructed over existing substrates for upgraded weathertightness and extended durability.
Unlike typical re-roofing projects, the system allows the building's occupants and activities to remain undisturbed; no relocation is required.
Condensation Management
RoofLogic develops the system and provides project-specific technical support, while installation is carried out by an approved roofing contractor in accordance with RoofLogic requirements. This coordinated approach helps manage condensation risk throughout the service life of the roof system.
Cost-Effective
Avoids many expenses associated with re-roofing, including tenting, disposal of old roofing materials, and associated labour costs.
Tailored Engineering
RoofLogic conducts a comprehensive roof assessment to ensure the system is precisely engineered to meet all structural performance requirements.
Enhanced Detailing
Enables meticulous roof detailing, enhancing the durability and weathertightness of critical roof junctions for the long term — tapered boards enable creation of pitches to guide and redirect the flow of water on flat roofs.
Improved Thermal Efficiency
Offers the flexibility to incorporate additional insulation layers, significantly enhancing the thermal performance of a roof.
Note: RoofLogic Australia does not supply the liner deck or external roof sheeting. These profiles are to be selected and supplied by the roofing contractor or project team and are subject to RoofLogic review for compatibility with the FiberthermX system.
Recover flexibility
Install over what is already there
RoofLogic Recover systems offer complete flexibility, providing a simple, cost-effective, long-term solution where a traditional re-roof would have been problematic.
Existing trough section roofing
Low pitch, damage, poor detailing and complex junctions all compromise weathertightness. RoofLogic examines the existing roof and develops a structural scheme for a robust, warrantable Recover system.
Existing concrete substrates
Existing membranes can be left in situ and often re-purposed as the vapour control layer. Roof Board HD is mechanically attached to the substrate on a fixing pattern designed for project wind loads.
Existing timber substrates
The same approach applies over timber, taking the adhesive bond of the existing membrane out of the equation and providing certainty of structural performance.
Bespoke
Systems built to precise performance criteria
RoofLogic collaborates with architects and designers to customise high-performance roof systems for high thermal performance, specific acoustic requirements, exposed internal aesthetics, complex geometry, or aggressive environments.
